Réchauffeur en Té Droit Arctic Spas 3,6kw
Description du produit
Box Quantity: 1
Power: Volts: 230 Hz: 50 KW: 3.6 Amps: 13.5-14.5
Specifications:
Sensor compatibility: Works with Gecko sensors supplied with an Arctic Spa but can be modified
Required flow rate: Set by pressure switch
Flow detection: Pressure switch
Compatible With: This is not an official Arctic Spa heater but will replace the heaters in Models: Cub, Fox, Glacier, Yukon, Frontier, Summit, Klondiker, Kodiac, Tundra 2002 - 2005. This unit will also work with newer models 2005 - 2007 as the pipework is flexible and can be easily re-positioned.
Connections & Fixings: This is a remote heater that connects to the control system connected directly to the PCB via 3 wires black green and white, the older style had a grey 5-pin JJ cord. You will need to re-connect the pressure switch and also slide the hi-limit sensor back into the little pocket provided. The union connections are industry standard 2 inch female MPT screw thread connection.
Dimensions: Length: 326 mm Diameter: 54 mm
Attributs du produit
| Marque: HydroQuip |
| Type de produit: Chauffage à distance |
| Connexion Électrique: Corde |
| Puissance kW: 3.6kW |
| Référence du diamètre du tube: 2 pouces |
| Matériau de l'élément: Incoloy |
Attributs du produit
| Marque: HydroQuip |
| Type de produit: Chauffage à distance |
| Connexion Électrique: Corde |
| Puissance kW: 3.6kW |
| Référence du diamètre du tube: 2 pouces |
| Matériau de l'élément: Incoloy |
Description du produit
Box Quantity: 1
Power: Volts: 230 Hz: 50 KW: 3.6 Amps: 13.5-14.5
Specifications:
Sensor compatibility: Works with Gecko sensors supplied with an Arctic Spa but can be modified
Required flow rate: Set by pressure switch
Flow detection: Pressure switch
Compatible With: This is not an official Arctic Spa heater but will replace the heaters in Models: Cub, Fox, Glacier, Yukon, Frontier, Summit, Klondiker, Kodiac, Tundra 2002 - 2005. This unit will also work with newer models 2005 - 2007 as the pipework is flexible and can be easily re-positioned.
Connections & Fixings: This is a remote heater that connects to the control system connected directly to the PCB via 3 wires black green and white, the older style had a grey 5-pin JJ cord. You will need to re-connect the pressure switch and also slide the hi-limit sensor back into the little pocket provided. The union connections are industry standard 2 inch female MPT screw thread connection.
Dimensions: Length: 326 mm Diameter: 54 mm