Balboa 3.0KW Heater M7 GS100 (or BP200)
Product Description
Balboa 3.0kW Heater M7 – Remote Spa Heater
The Balboa 3.0kW Heater M7 is primarily designed for use with the GS100 control system but is also compatible with BP200 control boxes. This heater provides powerful water heating with M7 sensor technology, ensuring precise temperature regulation and operational safety.
Key Features:
- Heating Capacity: 3.0kW
- Voltage: 230V
- Frequency: 50Hz
- Current Draw: 13.0 Amps
- Construction: Incoloy heating element for enhanced durability and corrosion resistance
- Flow Detection: Equipped with M7 sensors at both ends of the heater tube for accurate monitoring
- Plumbing Connections: Designed for 1.5-inch plumbing setups
- Length: Approximately 10 inches
Compatibility:
- Commonly used with GS100 control systems
- Compatible with BP200 control boxes
Installation Note:
Ensure the heater tube is primed with water before powering on to avoid damage to the element.
Product Attributes
| Product Type: Heater Tube |
| Marque: Balboa |
| Power kW: 3.0kW |
| Tube Length: 290mm |
| Assembled Length: 370mm |
| Element Material: Incoloy |
| Plumbing Size: 1.5" |
Product Attributes
| Product Type: Heater Tube |
| Marque: Balboa |
| Power kW: 3.0kW |
| Tube Length: 290mm |
| Assembled Length: 370mm |
| Element Material: Incoloy |
| Plumbing Size: 1.5" |
Product Description
Balboa 3.0kW Heater M7 – Remote Spa Heater
The Balboa 3.0kW Heater M7 is primarily designed for use with the GS100 control system but is also compatible with BP200 control boxes. This heater provides powerful water heating with M7 sensor technology, ensuring precise temperature regulation and operational safety.
Key Features:
- Heating Capacity: 3.0kW
- Voltage: 230V
- Frequency: 50Hz
- Current Draw: 13.0 Amps
- Construction: Incoloy heating element for enhanced durability and corrosion resistance
- Flow Detection: Equipped with M7 sensors at both ends of the heater tube for accurate monitoring
- Plumbing Connections: Designed for 1.5-inch plumbing setups
- Length: Approximately 10 inches
Compatibility:
- Commonly used with GS100 control systems
- Compatible with BP200 control boxes
Installation Note:
Ensure the heater tube is primed with water before powering on to avoid damage to the element.