(Boitier 4.1) Boitier de contrôle Balboa GS510SZ
Description du produit
Dimensions: Length: 500 mm (inc heater) 320 mm (box only) Width: 120 mm Height: 270 mm
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the serial standard VL range such as the VL700S and VL701S, also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug on to the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
Attributs du produit
Marque: Balboa |
Type de produit: Boîtier de commande |
Longueur Max: 420mm |
Hauteur Max: 270mm |
Pompes Max: 2 |
Puissance kW: 3.0kW |
Circ Pump: Oui |
Souffleur: Oui |
Profondeur Max: 100mm |
Relais informatiques totaux: 4 |
Dimension du chauffage: 2 pouces |
Attributs du produit
Marque: Balboa |
Type de produit: Boîtier de commande |
Longueur Max: 420mm |
Hauteur Max: 270mm |
Pompes Max: 2 |
Puissance kW: 3.0kW |
Circ Pump: Oui |
Souffleur: Oui |
Profondeur Max: 100mm |
Relais informatiques totaux: 4 |
Dimension du chauffage: 2 pouces |
Description du produit
Dimensions: Length: 500 mm (inc heater) 320 mm (box only) Width: 120 mm Height: 270 mm
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single speed
Air Blower: x 1 (optional)
Heater: x 1 (3KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the serial standard VL range such as the VL700S and VL701S, also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug on to the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.