Balboa GS510SZ PCB
Product Description
Box Quantity: 1. Dimensions: Length: 280 mm Height: 130 mm
Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.
This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.
This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
Product Attributes
| Brand: Balboa |
| Product Type: PCB |
| Length: 280mm |
| Width: 130mm |
| Model / Series: GS |
| Circ Pump: Yes |
| No. of Pumps: 2 |
| Blower: Yes |
Product Attributes
| Brand: Balboa |
| Product Type: PCB |
| Length: 280mm |
| Width: 130mm |
| Model / Series: GS |
| Circ Pump: Yes |
| No. of Pumps: 2 |
| Blower: Yes |
Product Description
Box Quantity: 1. Dimensions: Length: 280 mm Height: 130 mm
Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.
This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.
Volts: 230 Hz: 50
Pump 1: Single or dual speed + circulation pump if required
Pump 2: Single speed
Pump 3: N/A
Air Blower: Yes (optional)
Heater: Yes
Ozone: Yes
Light: 12 volt
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.
This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.
*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.