(Box 2.1) Balboa GS500Z Control Box 2.0kW
Product Description
Box Quantity: 5. Dimensions: Length: 500 mm (inc heater) 320 mm (heater only) Width: 120 mm Height: 270 mm
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: N/A
Air Blower: N/A
Heater: x 1 (2KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the mini VL range such as the VL200. It can also run topside controls from the duplex VL range such as the VL404 and the MVP260. Found on some smaller Spas such as Dream Maker, Strong Spas, and Freeflow / Eurospa. Also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
As this is only a 2.0kW system this makes it a useful entry-level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: N/A
Air Blower: N/A
Heater: x 1 (2KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the mini VL range such as the VL200. It can also run topside controls from the duplex VL range such as the VL404 and the MVP260. Found on some smaller Spas such as Dream Maker, Strong Spas, and Freeflow / Eurospa. Also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
As this is only a 2.0kW system this makes it a useful entry-level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.
Product Attributes
| Brand: Balboa |
| Product Type: Control Box |
| Max Length: 420mm |
| Max Height: 270mm |
| Max Pumps: 1 |
| Power kW: 2.0kW |
| Circ Pump: Yes |
| Blower: No |
| Max Depth: 100mm |
| Total Comp. Relays: 2 |
| Heater Size: 2 Inch |
Product Attributes
| Brand: Balboa |
| Product Type: Control Box |
| Max Length: 420mm |
| Max Height: 270mm |
| Max Pumps: 1 |
| Power kW: 2.0kW |
| Circ Pump: Yes |
| Blower: No |
| Max Depth: 100mm |
| Total Comp. Relays: 2 |
| Heater Size: 2 Inch |
Product Description
Box Quantity: 5. Dimensions: Length: 500 mm (inc heater) 320 mm (heater only) Width: 120 mm Height: 270 mm
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: N/A
Air Blower: N/A
Heater: x 1 (2KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the mini VL range such as the VL200. It can also run topside controls from the duplex VL range such as the VL404 and the MVP260. Found on some smaller Spas such as Dream Maker, Strong Spas, and Freeflow / Eurospa. Also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
As this is only a 2.0kW system this makes it a useful entry-level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.
Volts: 230vac Hz: 50 Amps: 16A
Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: N/A
Air Blower: N/A
Heater: x 1 (2KW)
Ozone: x 1
Light: x1, 12 volt
TV/AV: Point available
Compatible With: Systems fitted with topside controls from the mini VL range such as the VL200. It can also run topside controls from the duplex VL range such as the VL404 and the MVP260. Found on some smaller Spas such as Dream Maker, Strong Spas, and Freeflow / Eurospa. Also suitable for upgrades
Connections: 2-inch socket heater union sleeves. Amp cables plug into the PCB to operate the components.
The M7 technology means you do not need to have sensors and flow switches going back into the tub as everything is done inside the control box by 2 sensors.
This is a generic unlicensed control box. This unit must be fitted by a competent individual or tradesman. Incorrect installation could invalidate the warranty.
As this is only a 2.0kW system this makes it a useful entry-level system. The heater only draws around 8.5amps so if the system is designed to do so, you could have a small combined system running from a domestic 13amp supply. You must always consult a qualified electrician for accurate information prior to installation.